Helmet Airbrush

I will be an airbrush singer and do so for a full time income. We go on it you have an airbrush if you are asking. Or even, that would be the initial step.

First, it isn't advised to color any helmet as it has got the chance of geopordizing the stability from it's safety abilities.

If you must, below are a few fundamental actions:

Dismantle because mush as possible, mask extremely well all parts which are not getting coated, especially the protective foam around. Any solvent based products with obliterate the foam cushioning.

Preparation the helmet by sanding with 600 grit wet/dry sandpaper until all of the gloss is gone, making it searching flat. Never sand to far!

As you probably will not understand the precise clear that has been used, it might be best to prime it. PPG tends to make an excellent waterborne primer, which may be preferable, but an automotive primer (urethane) like 1k/2k works too (map automotive paint offer) After 2-3 coats, lightly sand with 800 wet/dry.

Once you have sanded and cleansed the helmet with an authorized degreaser, you could begin your artwork. Createx makes a great waterborne item and is affordable. You are able to select it at any hobby lobby to get started. The airbrush part you are going to need to investigate as there clearly was far to much to publish upon it right here. Ahead of the artwork but base coat the helmet with an excellent color to offer a great clean substrate to focus on.

Once you have done your artwork, time for obvious. Once more, PPG is an appropriate choice and that can be located at numerous automotive paint supply stores (maybe not Napa automobile components). With a clear area, use a semi light coating of obvious, it's your "tack" coat. In around 10 minutes, occasionally less, you can easily put a medium wet layer, hold off and your final wet coat.

After this has dried out completely (time hinges on item) you'll sand with 1000 wet/dry and work your path to 3000 grit. After sanding, buff to a lovely shine with automobile detailing items.

This is the simple answer. There are several ways to take action, it is one and incredibly summerized. Whoever is a specialist artist had to start somewhere, therefore go right ahead and have some fun. I will suggest beginning on a junker from a swap meet first...you do not want to screw another person's $500+ helmet up!

Finally, if you want squirt gear to master on, harbor cargo is a beneficial source for hvlp's, airbrushes and compressors...until you graduate to something like Badger, Iwata or Sata.